| About |
|---|
| ALCOLOR® Function POM LE A BK1226-07 is an Acetal (POM) Copolymer product. It can be processed by blow molding, extrusion, or injection molding and is available in Asia Pacific, Europe, or North America. Characteristics include: RoHS Compliant Copolymer High Flow Low Emissions&& |
| Product Description | |
|---|---|
| Supplier | ALBIS |
| Generic | Copolymer Polyformaldehyde |
| Material Status | Commercial: Active |
| Features | High liquidity,Machinable,Low odor,Copolymer,Low to no calcium content |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Volume Rate | |||
| 190℃，2.16 kg | 6.00 | cm³/10min | ISO 1133 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| thermal stability | |||
| Colorant | < 280 | ℃ |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Dosage | 2.0 to 4.0 | % | |
| For use in | Polyoxymethylene Copolymer | ||
| Light Fastness Colorant | Blue Woolscale 8 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | |||
| Desiccant desiccant | 100 to 110 | °C | |
| Hot air dryer | 100 to 110 | °C | |
| Drying time | |||
| Desiccant desiccant | 3.0 to 5.0 | hr | |
| Hot air dryer | 2.0 to 3.0 | hr | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |