ALCOLOR® PA A BL925-3468

About
ALCOLOR® PA A BL925-3468 is a Polyamide 6 (Nylon 6) product. It can be processed by blow molding, extrusion, or injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: rohs compliant.&&

Product Description
Supplier	ALBIS
Generic	PA6
Material Status	Commercial: Active
Features	Machinable,Low to no calcium content
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
THERMAL	Nominal value	Unit	Test method
thermal stability
Colorant	< 260	℃

Supplementary information	Nominal value	Unit
Dosage	3.0	%
For use in	Polyamide
Light Fastness Colorant	Blue Woolscale 7

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature – hot air dryer	80	°C
Drying time – hot air dryer	2.0 to 12	hr

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.