ALCOM® ABS 530/29 BL1497-04MCF

About
ALCOM® ABS 530/29 BL1497-04MCF is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Asia Pacific, Europe, or North America. Applications of ALCOM® ABS 530/29 BL1497-04MCF include appliances, cleaning applications, construction applications, electrical/electronic applications and housings. Characteristics include: RoHS Compliant High Flow&&

Product Description
Supplier	ALBIS
Generic	ABS
Material Status	Commercial: Active
Features	High liquidity
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.08	g/cm³	ISO 1183
Melt Volume Rate
220℃，10 kg	28.0	cm³/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	9.0	kJ/m²	ISO 179-1eA
Charpy Unnotch Impact strength	24	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	85.0	℃	ISO 75-2/A
Vicat Softening Temp
B50	94.0	℃	ISO 306

MECHANICAL	Nominal value	Unit	Test method
Ball hardness
H358/30	103	MPa	ISO 2039-1
Tensile modulus	2350	MPa	ISO 527-2
Bending modulus	2600	MPa	ISO 178
bending strength	61.0	MPa	ISO 178

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature
Desiccant desiccant	80	°C
Hot air dryer	80	°C
Drying time
Desiccant desiccant	3.0 to 6.0	hr
Hot air dryer	2.0 to 4.0	hr
Processing (melt) temperature	220 to 260	°C
Mold temperature	50 to 80	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.