ALCOM® PA6 900/8.4 GF10 MR20 NC0001-00

About
ALCOM® PA6 900/8.4 GF10 MR20 NC0001-00 is a Polyamide 6 (Nylon 6) product filled with 10% glass fiber and 20% mineral. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of ALCOM® PA6 900/8.4 GF10 MR20 NC0001-00 include automotive and housings. Characteristics include: RoHS Compliant Good Aesthetics Heat Resistant Warp Resistant&&

Product Description
Supplier	ALBIS
Generic	PA6
Material Status	Commercial: Active
Features	Low warping,Good heat aging resistance,Good surface appearance
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.37	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	8300	MPa	ISO 527-2
tensile strength
fracture	115	MPa	ISO 527-2
Tensile strain
fracture	2.5	%	ISO 527-2
Bending modulus	8200	MPa	ISO 178
bending strength	175	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	6.0	kJ/m²	ISO 179-1eA
Charpy Unnotch Impact strength	50	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	200	℃	ISO 75-2/A
Vicat Softening Temp
B50	210	℃	ISO 306

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature – hot air dryer	80	°C
Drying time – hot air dryer	2.0 to 12	hr
Processing (melt) temperature	270 to 290	°C
Mold temperature	80 to 100	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.