ALCOM® PA66 910/1.1 CF10 GF20

About
ALCOM® PA66 910/1.1 CF10 GF20 is a Polyamide 66 (Nylon 66) product filled with 10% carbon fiber and 20% glass fiber. It is available in Asia Pacific, Europe, or North America. Applications of ALCOM® PA66 910/1.1 CF10 GF20 include automotive and engineering/industrial parts. Characteristics include: RoHS Compliant Conductive Heat Resistant High Stiffness&&

Product Description
Supplier	ALBIS
Generic	PA66
Material Status	Commercial: Active
Features	Good Rigidity,Conductive,Heat Stabilized
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.32	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	14000	MPa	ISO 527-2
Tensile strain
fracture	2.2	%	ISO 527-2
Bending modulus	11500	MPa	ISO 178
bending strength	280	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	7.0	kJ/m²	ISO 179-1eA
Charpy Unnotch Impact strength	55	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	250	℃	ISO 75-2/A
Vicat Softening Temp
B50	200	℃	ISO 306

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	< 1.0E+3	ohms	IEC 60093

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80	°C
Drying time	2.0 to 12	hr
Processing (melt) temperature	280 to 300	°C
Mold temperature	80 to 120	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.