ALCOM® PA66 910/9.1 GF/MR40

About
ALCOM® PA66 910/9.1 GF/MR40 is a Polyamide 66 (Nylon 66) product filled with 40% glassmineral. It is available in Asia Pacific, Europe, or North America. Applications of ALCOM® PA66 910/9.1 GF/MR40 include automotive, electrical/electronic applications and housings. Characteristics include: RoHS Compliant Good Aesthetics Heat Resistant Warp Resistant&&

Product Description
Supplier	ALBIS
Generic	PA66
Material Status	Commercial: Active
Features	Low warping,Good surface appearance,Heat Stabilized
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.44	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	7800	MPa	ISO 527-2
Tensile strain
fracture	2.5	%	ISO 527-2
Bending modulus	7000	MPa	ISO 178
bending strength	175	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	4.0	kJ/m²	ISO 179-1eA
Charpy Unnotch Impact strength	42	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	240	℃	ISO 75-2/A
Vicat Softening Temp
B50	200	℃	ISO 306

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature – hot air dryer	80	°C
Drying time – hot air dryer	2.0 to 12	hr
Processing (melt) temperature	270 to 290	°C
Mold temperature	80 to 100	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.