ALCOM® POM 770/1 PTFE15

About
ALCOM® POM 770/1 PTFE15 is an Acetal (POM) Copolymer product filled with 15% ptfe fiber. It is available in Asia Pacific, Europe, or North America. Applications of ALCOM® POM 770/1 PTFE15 include engineering/industrial parts and automotive. Characteristics include: RoHS Compliant Copolymer Wear Resistant&&

Product Description
Supplier	ALBIS
Generic	Copolymer Polyformaldehyde
Material Status	Commercial: Active
Features	Copolymer,Good wear resistance
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.48	g/cm³	ISO 1183
Melt Volume Rate
190℃，2.16 kg	6.00	cm³/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2250	MPa	ISO 527-2
Bending modulus	2200	MPa	ISO 178
bending strength	70.0	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	3.0	kJ/m²	ISO 179-1eA
Charpy Unnotch Impact strength	50	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	90.0	℃	ISO 75-2/A
Vicat Softening Temp
B50	145	℃	ISO 306

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature
Desiccant desiccant	100 to 110	°C
Hot air dryer	100 to 110	°C
Drying time
Desiccant desiccant	3.0 to 5.0	hr
Hot air dryer	2.0 to 3.0	hr
Processing (melt) temperature	180 to 220	°C
Mold temperature	60 to 100	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.