ALCOM® PPA 930/1 GF30 PTFE15

About
ALCOM® PPA 930/1 GF30 PTFE15是一种聚二甲苯酰胺(PPA)产品,含有的填充物为30% 玻璃纤维增强材料。它,在亚太地区、北美洲或欧洲有供货。 ALCOM® PPA 930/1 GF30 PTFE15的应用领域包括工程/工业配件和汽车行业。特性包括: 符合 REACH 标准通过 ROHS 认证润滑耐磨高刚度&&

Product Description
Supplier	ALBIS
Generic	PPA
Material Status	Commercial: Active
Features	Good Rigidity,Good wear resistance
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.53	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	10200	MPa	ISO 527-2
tensile strength
fracture	164	MPa	ISO 527-2
Tensile strain
fracture	1.9	%	ISO 527-2
Bending modulus	9500	MPa	ISO 178
bending strength	235	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	9.0	kJ/m²	ISO 179-1eA
Charpy Unnotch Impact strength	51	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	285	℃	ISO 75-2/A
Vicat Softening Temp
B50	264	℃	ISO 306

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	110 to 130	°C
Drying time	4.0 to 8.0	hr
Processing (melt) temperature	320 to 345	°C
Mold temperature	80 to 140	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.