ALCUDIA® HDPE 49070-UV

About
ALCUDIA® 49070UV is a high-density polyethylene copolymer of hexene, with high molecular weight. It is especially designed to make, by blow molding, containers of medium and high capacity (up to 5000 litres), for petroleum derivatives. This grade contains stabilizers according to the end-use of the item in order to reinforce the thermal and light stability. It has an excellent environmental stress cracking resistance (ESCR) and impact resistance. This grade is suitable to produce containers according to the Spanish UNE-53432 parts 1, 2 and 3 and the EN 13341 in Europe, or NFM-88-560 in France. It is also included in the German DIBT list of materials to contain petroleum derivatives. TYPICAL APPLICATIONS IBC tanks High capacity containers. Recommended melt temperature range from 190 to 215°C. Processing conditions should be optimised for each production line.&&

About

ALCUDIA® 49070UV is a high-density polyethylene copolymer of hexene, with high molecular weight. It is especially designed to make, by blow molding, containers of medium and high capacity (up to 5000 litres), for petroleum derivatives. This grade contains stabilizers according to the end-use of the item in order to reinforce the thermal and light stability. It has an excellent environmental stress cracking resistance (ESCR) and impact resistance. This grade is suitable to produce containers according to the Spanish UNE-53432 parts 1, 2 and 3 and the EN 13341 in Europe, or NFM-88-560 in France. It is also included in the German DIBT list of materials to contain petroleum derivatives. TYPICAL APPLICATIONS IBC tanks High capacity containers. Recommended melt temperature range from 190 to 215°C. Processing conditions should be optimised for each production line.&&

Product Description
Supplier	REPSOL
Generic	HDPE
Material Status	Commercial: Active
Features	High impact resistance,Food contact compliance,High molecular weight,Hexene copolymers,Heat Stabilized,High ESCR
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.949	g/cm³	ISO 1183
Melt Flow Rate			ISO 1133
190℃，21.6kg	9.0	g/10min	ISO 1133
190℃，5.0kg	0.40	g/10min	ISO 1133
ESCR(Environmental Stress Cracking Resistance)
50 ℃, 10% non-ionic surfactant, F50	> 400	hr	ASTM D1693

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	65		ISO 868
tensile strength
fracture	30.0	MPa	ISO 527-2
yield	25.0	MPa	ISO 527-2
Tensile strain
fracture	800	%	ISO 527-2
Bending modulus	1000	MPa	ISO 178

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	127	℃	ISO 306/A

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	190 to 215	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.