ALCUDIA® HDPE 5502E

About
ALCUDIA® 5502E is a high-density polyethylene copolymer of hexene, with high molecular weight. It is specially designed to make, by blow molding-extrusion, tanks for liquid detergents and chemicals. This grade contains stabilizers according to the end use of the item in order to reinforce the thermal stability. Good environmental stress cracking resistance can be obtained with ALCUDIA® 5502E due to its molecular weight and density. TYPICAL APPLICATIONS Packaging of non-aggressive liquid detergents and chemicals. Recommended melt temperature range from 180 to 200°C. Processing conditions should be optimised for each production line. The high density polyethylene ALCUDIA® 5502E is a hexene copolymer of medium molecular weight, due to its characteristics is specially intended for extrusion of doubled corrugated drainage and sewage pipes. This product is supplied in natural colour but they can be easily coloured with pigments steady at processing temperature, using dry-colouring or masterbatch techniques. TYPICAL APPLICATIONS Structured doubled wall without pressure pipes for underground drainage and sewage. Mono and doubled wall corrugated pipes for protecting cables. Recommended melt temperature range 190 – 210°C. Processing conditions should be optimised for each production line.&&

About

ALCUDIA® 5502E is a high-density polyethylene copolymer of hexene, with high molecular weight. It is specially designed to make, by blow molding-extrusion, tanks for liquid detergents and chemicals. This grade contains stabilizers according to the end use of the item in order to reinforce the thermal stability. Good environmental stress cracking resistance can be obtained with ALCUDIA® 5502E due to its molecular weight and density. TYPICAL APPLICATIONS Packaging of non-aggressive liquid detergents and chemicals. Recommended melt temperature range from 180 to 200°C. Processing conditions should be optimised for each production line. The high density polyethylene ALCUDIA® 5502E is a hexene copolymer of medium molecular weight, due to its characteristics is specially intended for extrusion of doubled corrugated drainage and sewage pipes. This product is supplied in natural colour but they can be easily coloured with pigments steady at processing temperature, using dry-colouring or masterbatch techniques. TYPICAL APPLICATIONS Structured doubled wall without pressure pipes for underground drainage and sewage. Mono and doubled wall corrugated pipes for protecting cables. Recommended melt temperature range 190 – 210°C. Processing conditions should be optimised for each production line.&&

Product Description
Supplier	REPSOL
Generic	HMW-HDPE
Material Status	Commercial: Active
Features	Food contact compliance,High molecular weight,Solvent resistance,Hexene copolymers,Heat Stabilized,High ESCR,Resistance to detergents
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.955	g/cm³	ISO 1183
Melt Flow Rate			ISO 1133
190℃，2.16kg	0.23	g/10min	ISO 1133
190℃，21.6kg	22	g/10min	ISO 1133
190℃，5.0kg	1.1	g/10min	ISO 1133
ESCR(Environmental Stress Cracking Resistance)			ASTM D1693
10% emulsifier, F50	> 35.0	hr	ASTM D1693
50 ℃, 10% non-ionic surfactant, F50	35.0	hr	ASTM D1693

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	65		ISO 868
tensile strength
fracture	28.0	MPa	ISO 527-2
Tensile strain
fracture	800	%	ISO 527-2
Bending modulus	1200	MPa	ISO 178

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -70.0	℃	ASTM D746
Vicat Softening Temp	128	℃	ISO 306/A

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	180 to 210	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.