ALCUDIA® HDPE TR-210

About
ALCUDIA® TR210 is a high density polyethylene developed to provide excellent mechanical properties, toughness, good environmental stress cracking resistance (ESCR) and stability against oxidative degradation. This product provides a superior performance at high-speed extrusion together with a smooth surface finish of the cable. It is stabilized to be protected from thermal and shear degradation and contains a metal deactivator to ensure long-term ageing properties. TYPICAL APPLICATIONS Solid insulation of telephone single. Skin layer in foam-skin construction. Jelly-filled cable. ALCUDIA® TR210 can be extruded at a high melt temperature between 230°C – 260°C without risk of thermal or shear degradation. The optimum conditions depend on the application and the extrusion equipment used. When processed using proper extrusion conditions, ALCUDIA® TR210 is expected to meet the requirements of the following product and cable specifications: ISO 1872 PE KHN 45D006/012 ASTM D 1248 III, A4, Grade E9 NF C 32-060 ISM3 BS 6234, Type H03 VDE 0207 Teil2 2YI1 EN 50290-2-23 EN 50288&&

About

ALCUDIA® TR210 is a high density polyethylene developed to provide excellent mechanical properties, toughness, good environmental stress cracking resistance (ESCR) and stability against oxidative degradation. This product provides a superior performance at high-speed extrusion together with a smooth surface finish of the cable. It is stabilized to be protected from thermal and shear degradation and contains a metal deactivator to ensure long-term ageing properties. TYPICAL APPLICATIONS Solid insulation of telephone single. Skin layer in foam-skin construction. Jelly-filled cable. ALCUDIA® TR210 can be extruded at a high melt temperature between 230°C – 260°C without risk of thermal or shear degradation. The optimum conditions depend on the application and the extrusion equipment used. When processed using proper extrusion conditions, ALCUDIA® TR210 is expected to meet the requirements of the following product and cable specifications: ISO 1872 PE KHN 45D006/012 ASTM D 1248 III, A4, Grade E9 NF C 32-060 ISM3 BS 6234, Type H03 VDE 0207 Teil2 2YI1 EN 50290-2-23 EN 50288&&

Product Description
Supplier	REPSOL
Generic	HDPE
Material Status	Commercial: Active
Features	Good flexibility,High ESCR
Availabilitys	North America,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.943	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	0.80	g/10min	ISO 1133
ESCR(Environmental Stress Cracking Resistance)
F50	> 1000	hr	ASTM D1693

MECHANICAL	Nominal value	Unit	Test method
tensile strength
fracture	20.0	MPa	ISO 527-2
Tensile strain
fracture	700	%	ISO 527-2

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -76.0	℃	ASTM D746
Vicat Softening Temp	126	℃	ISO 306/A
Oxygen sensing time
200℃	> 30	min	EN 728

Aging performance	Nominal value	Unit	Test method
Retention rate of mechanical properties
100℃	> 75	%	ISO 527-3

Electrical performance	Nominal value	Test method
Dielectric constant
1 MHz	2.30	ASTM D150
Dissipation factor
1 MHz	4.0E-4	ASTM D150

Supplementary information	Nominal value	Unit	Test method
Long Term Stability	0 Failures		IEC 60811-4-2
Weight gain
by gel absorption，70℃	< 10	%	IEC 60811-4-2

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	230 to 260	°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. 0 Failures
3. 10 days
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.