ALCUDIA® LDPE PE-017

About
ALCUDIA® PE017 is a low density polyethylene grade, produced by high pressure autoclave technology, suitable for extrusion coating and injection moulding applications. This material offers a good balance between easy processability and stiffness. It does not contain any additives. TYPICAL APPLICATIONS Extrusion coating. Injection moulding. Recommended melt temperature range for extrusion coating from 275 to 330°C. Processing conditions should be optimised for each production line.&&

About

ALCUDIA® PE017 is a low density polyethylene grade, produced by high pressure autoclave technology, suitable for extrusion coating and injection moulding applications. This material offers a good balance between easy processability and stiffness. It does not contain any additives. TYPICAL APPLICATIONS Extrusion coating. Injection moulding. Recommended melt temperature range for extrusion coating from 275 to 330°C. Processing conditions should be optimised for each production line.&&

Product Description
Supplier	REPSOL
Generic	LDPE
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Food contact compliance
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.919	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	8.5	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	46		ISO 868
tensile strength
fracture	10.0	MPa	ISO 527-2
Tensile strain
fracture	500	%	ISO 527-2
Bending modulus	160	MPa	ISO 178

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	86.0	℃	ISO 306/A

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	275 to 330	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.