ALCUDIA® LDPE PE-022

About
ALCUDIA® PE022 is a low density polyethylene grade of very high fluidity, intended for injection moulding applications due to very low viscosity that allows an easy filling of the moulds, even with complex geometry, and it is very versatile to disperse pigments. It does not contain any additives. TYPICAL APPLICATIONS Due to its good properties balance, ALCUDIA® PE022 is a very versatile grade and is suitable for articles of very diverse sizes: Caps and closures. Toys. Component in the preparation of masterbatches and blends with waxes and other polymers. Recommended melt temperature range from 180 to 230°C. Processing conditions should be optimised for each production line.&&

About

ALCUDIA® PE022 is a low density polyethylene grade of very high fluidity, intended for injection moulding applications due to very low viscosity that allows an easy filling of the moulds, even with complex geometry, and it is very versatile to disperse pigments. It does not contain any additives. TYPICAL APPLICATIONS Due to its good properties balance, ALCUDIA® PE022 is a very versatile grade and is suitable for articles of very diverse sizes: Caps and closures. Toys. Component in the preparation of masterbatches and blends with waxes and other polymers. Recommended melt temperature range from 180 to 230°C. Processing conditions should be optimised for each production line.&&

Product Description
Supplier	REPSOL
Generic	LDPE
Material Status	Commercial: Active
Features	Excellent Processability,Good flexibility,High liquidity,Low Viscosity,Food contact compliance
Availabilitys	North America,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.915	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	70	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	40		ISO 868
tensile strength
fracture	8.00	MPa	ISO 527-2
Tensile strain
fracture	120	%	ISO 527-2
Bending modulus	100	MPa	ISO 178

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	75.0	℃	ISO 306/A
Melting temperature	105	℃

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	180 to 230	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.