| About |
|---|
| ALFATER XL® D40I 3EF0001 is a Polypropylene + EPDM Rubber (PP+EPDM) product. It is available in Asia Pacific, Europe, or North America. Applications of ALFATER XL® D40I 3EF0001 include automotive, construction applications, engineering/industrial parts and sealing applications. Characteristics include: RoHS Compliant UV Stabilized Good Aesthetics High Flow Weather Resistant&& |
| Product Description | |
|---|---|
| Supplier | ALBIS |
| Generic | TPV |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Alkali resistant,Good surface appearance,High liquidity,Ozone resistance |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.950 | g/cm³ | ISO 1183 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strain | |||
| fracture | 500 | % | ISO 37 |
| tear strength | 62 | kN/m | ISO 34-1 |
| Compression deformation | |||
| 100℃，22 hr | 80 | % | ISO 815 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Operating temperature | -40 to 125 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 40 | ISO 868 | |
| tensile strength | |||
| yield | 12.4 | MPa | ISO 37 |
| 100% strain | 9.70 | MPa | ISO 527-2 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 70 to 80 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Processing (melt) temperature | 195 to 215 | °C | |
| Mold temperature | 10 to 70 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type 2 |
| 3. Method Ba, Angle (Unnicked) |
| 4. Type A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |