| About |
|---|
| Algoflon® F 5 is a fine cut homopolymer PTFE powder that is white, granular and non-free flowing. It is designed for filled grades and in particular is recommended for compounds with glass fiber since it allows good degassing during the sintering process. Main features of Algoflon® F 5 are: Fine particle size Narrow particle size distribution Good blendability Low porosity&& |
| Product Description | |
|---|---|
| Supplier | Solvay |
| Generic | PTFE |
| Material Status | Commercial: Active |
| Features | Solvent resistance |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.17 | ASTM D792 | |
| Average particle size | 15 | µm | Internal Method |
| Shrinkage rate | |||
| MD | 3.0 | % | ASTM D4894 |
| bulk density | 380 | g/l | ASTM D4894 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strain | |||
| fracture | 350 | % | |
| tensile strength | 40.0 | MPa | ASTM D4894 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |