Algoflon® G10

About
Algoflon® G10 is a polytetrafluoroethylene (PTFE) virgin resin. This product has been developed as a PTFE resin for use in ASTM D4894-15, Type 1 applications. Algoflon® G10 is recommended for use in pyrotechnic applications.&&

Product Description
Supplier	Solvay
Generic	PTFE
Material Status	Commercial: Negative
Features	Solvent resistance
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.13 to 2.18		ASTM D4894
Average particle size	550	µm	ASTM D4894
bulk density	500	g/l	ASTM D4894

MECHANICAL	Nominal value	Unit	Test method
Tensile strain
fracture	150	%	ASTM D4894
tensile strength
Minimum limit	13.9	MPa	ASTM D4894

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.