ALKAMIX™ MB-6002

About
ALKAMIX™ MB-6002 is an Antiblock Masterbatch formulated with an antiblock additive concentration of 25 percent. ALKAMIX™ MB-6002 can be added to polyethylene during extrusion to reduce the blocking tendency of film. The level may vary according to desired properties, however the recommended addition level is between 1 and 3 percent. The maximum level of addition of ALKAMIX™ MB-6002 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 4 percent, when added to a polyethylene formulation free of any antiblock additives. The suitability of finished articles manufactured using this material as a component, and the observance of given limitations, must be verified by the converter for each application to ensure compliance with all relevant regulations. An overall migration limit may apply to the finished article.&&

About

ALKAMIX™ MB-6002 is an Antiblock Masterbatch formulated with an antiblock additive concentration of 25 percent. ALKAMIX™ MB-6002 can be added to polyethylene during extrusion to reduce the blocking tendency of film. The level may vary according to desired properties, however the recommended addition level is between 1 and 3 percent. The maximum level of addition of ALKAMIX™ MB-6002 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 4 percent, when added to a polyethylene formulation free of any antiblock additives. The suitability of finished articles manufactured using this material as a component, and the observance of given limitations, must be verified by the converter for each application to ensure compliance with all relevant regulations. An overall migration limit may apply to the finished article.&&

Product Description
Supplier	Qenos
Generic	3D打印材料
Material Status	Commercial: Active
Features	High anti-blocking
Availabilitys	North America,Latin America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	> 0.980	g/cm³	ASTM D1505

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	< 200	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.