| About |
|---|
| Alkatuff LL710UV is a hexene LLDPE material specifically designed for rotational moulding and high speed extrusion processes. It has good ESCR, chemical resistance and toughness. Alkatuff LL710UV is UV stabilised to provide prolonged outdoor protection in Australian conditions. Alkatuff LL710UV is ideal for intricate items in a wide variety of consumer goods and playground equipment where good surface appearance and UV protection is important.&& |
| Product Description | |
|---|---|
| Supplier | Qenos |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good flexibility,Good surface appearance,Low density,Solvent resistance,Hexene copolymers,High ESCR |
| Availabilitys | Asia Pacific |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.930 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 10 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 100% non-ionic detergent, F50 | > 600 | hr | ASTM D1693A |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 15.0 | MPa | ASTM D638 |
| Bending modulus | |||
| 1% secant | 550 | MPa | ASTM D790-B |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 3. 0.50 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |