| About |
|---|
| ALPERFORM PU UV 0212-15 is a Thermoplastic Polyurethane Elastomer product. It can be processed by blow molding, extrusion, or injection molding and is available in Asia Pacific, Europe, or North America. Applications of ALPERFORM PU UV 0212-15 include construction applications and sporting goods. Characteristics include: RoHS Compliant UV Stabilized&& |
| Product Description | |
|---|---|
| Supplier | ALBIS |
| Generic | TPU |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Lead content is low to none,Low to no calcium content |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| Supplementary information | Nominal value | Unit | Test method |
| Dosage | 5.0 to 7.0 | % | |
| For use in | Thermoplastic Urethan Elastomer | ||
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature – hot air dryer | 70 to 110 | °C | |
| Drying time – hot air dryer | 1.0 to 2.0 | hr | |
| Recommended maximum moisture content | 0.050 | % | |
| Processing (melt) temperature | 220 to 240 | °C | |
| Mold temperature | 20 to 40 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |