| About |
|---|
| AlphaGary’s 2222C series is a flexible, clear PVC designed for extrusion applications and formulated with additives sanctioned by the US FDA in Title 21 CFR. The available durometer range in this series is 50-95A. If features such as gamma stability, non-DEHP, or non-phthalate are necessary, please contact AlphaGary for an alternate candidate.&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Good Clarity,Good flexibility,Heat Stabilized |
| Availabilitys | North America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.21 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shore A, 10 seconds | 70 | ASTM D2240 | |
| Shore A, 15 seconds | 67 | ASTM D2240 | |
| tensile strength | |||
| fracture | 17.4 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 420 | % | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -40.0 | ℃ | ASTM D746 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |