| About |
|---|
| ALPHA PVC 3006-90 CLEAR is a flexible vinyl compound produced with FDA sanctioned raw materials. Designed with high flow for injection molding, PVC 3006 features sparkling clarity, high thermal stability, and easy mold release. The formula is available in a wide range of hardnesses and is the preferred grade for such demanding applications as drip chambers, tubing caps and connectors.&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Good Clarity,High liquidity,Good stripping performance,Heat Stabilized |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.26 to 1.30 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，21.6kg | 120 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shore A, 10 seconds, 3.18 mm | 87 to 93 | ASTM D2240 | |
| Shore A, 15 seconds, 6.35 mm | 86 to 92 | ASTM D2240 | |
| Tensile modulus | |||
| 100% secant | 12.4 | MPa | ASTM D638 |
| tensile strength | 17.2 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 270 | % | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | 3.00 | ℃ | ASTM D746 |
| Vicat Softening Temp | 66.0 | ℃ | ASTM D1525 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Barrel rear temperature | 143 | °C | |
| Barrel middle temperature | 154 | °C | |
| Barrel front temperature | 160 | °C | |
| Nozzle temperature | 171 | °C | |
| Processing (melt) temperature | 166 to 177 | °C | |
| Barrel 1 zone temperature | 143 | °C | |
| Barrel 2 zone temperature | 154 | °C | |
| Barrel 3 zone temperature | 160 | °C | |
| Barrel 4 zone temperature | 166 | °C | |
| Barrel 5 zone temperature | 166 | °C | |
| Connector temperature | 171 | °C | |
| Melt temperature | 166 to 177 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |