| About |
|---|
| ALTECH® ABS+PMMA A 1000/500 is an Acrylonitrile Butadiene Styrene + Acrylic (PMMA) (ABS+Acrylic) product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Engineering/Industrial Parts. Characteristics include: RoHS Compliant Copolymer Good Processability Stabilized&& |
| Product Description | |
|---|---|
| Supplier | ALBIS |
| Generic | ABS+PMMA |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Copolymer |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.10 | g/cm³ | ISO 1183 |
| Melt Volume Rate | |||
| 220℃，10 kg | 25.0 | cm³/10min | ISO 1133 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| — | 7.0 | kJ/m² | |
| -40℃ | 3.0 | kJ/m² | |
| Charpy Unnotch Impact strength | |||
| — | 48 | kJ/m² | |
| -40℃ | 45 | kJ/m² |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 81.0 | ℃ | ISO 75-2/A |
| Vicat Softening Temp | |||
| B50 | 95.0 | ℃ | ISO 306 |
| Operating temperature | -40 to 85 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Ball hardness | |||
| H358/30 | 125 | MPa | ISO 2039-1 |
| Tensile modulus | 2600 | MPa | ISO 527-2 |
| tensile strength | |||
| yield | 52.0 | MPa | |
| — | 52.0 | MPa | |
| Tensile strain | |||
| yield | 3.0 | % | |
| fracture | 22 | % | |
| Bending modulus | 2750 | MPa | ISO 178 |
| bending strength | |||
| 3.50% strain | 75.0 | MPa | |
| — | 78.0 | MPa |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | |||
| Desiccant desiccant | 65 to 90 | °C | |
| Hot air dryer | 65 to 80 | °C | |
| Drying time | |||
| Desiccant desiccant | 4.0 to 6.0 | hr | |
| Hot air dryer | 3.0 to 4.0 | hr | |
| Processing (melt) temperature | 220 to 260 | °C | |
| Mold temperature | 50 to 80 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |