ALTECH® PA6 A 1000/199 BK1011-13LSC

About
ALTECH® PA6 A 1000/199 BK1011-13LSC is a Polyamide 6 (Nylon 6) product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of ALTECH® PA6 A 1000/199 BK1011-13LSC include handles and housings. Characteristics include: Flame Rated RoHS Compliant Fast Molding Cycle Good Mold Release High Flow&&

Product Description
Supplier	ALBIS
Generic	PA6
Material Status	Commercial: Active
Features	High liquidity,Quick molding cycle,Good stripping performance
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.13	g/cm³
Water absorption rate
Saturation, 23 ℃	9.5	%
Equilibrium, 23 ℃, 50% RH	3.0	%

MECHANICAL	Nominal value	Unit
Tensile modulus	3200	MPa
tensile strength
fracture	85.0	MPa
Tensile strain
yield	10	%
fracture	10	%
Bending modulus	2800	MPa
bending strength	105	MPa

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	4.0	kJ/m²
Charpy Unnotch Impact strength	无断裂

THERMAL	Nominal value	Unit
Hot deformation temperature
1.8 MPa, unannealed	65.0	℃
Vicat Softening Temp	200	℃
Melting temperature
DSC	220	℃

Electrical performance	Nominal value	Unit
Surface resistivity	—	ohms
Volume resistivity	—	ohms·cm
Compared to the leakage tracing index	600	V

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
0.75 mm	HB

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature – hot air dryer	80	°C
Drying time – hot air dryer	2.0 to 12	hr
Recommended maximum moisture content	< 0.15	%
Processing (melt) temperature	250 to 270	°C
Mold temperature	40 to 80	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.