ALTECH® PA6 A 3030/500 GB30

About
ALTECH® PA6 A 3030/500 GB30 is a Polyamide 6 (Nylon 6) product filled with 30% glass bead. It is available in Asia Pacific, Europe, or North America. Typical application: Housings. Characteristics include: RoHS Compliant Good Mold Release Heat Stabilizer High Flow Warp Resistant&&

Product Description
Supplier	ALBIS
Generic	PA6
Material Status	Commercial: Active
Features	Low warping,High liquidity,Good stripping performance,Heat Stabilized
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.36	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	4200	MPa	ISO 527-2
tensile strength	60.0	MPa	ISO 527-2
Bending modulus	4000	MPa	ISO 178
bending strength	100	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	4.0	kJ/m²	ISO 179-1eA
Charpy Unnotch Impact strength	40	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	75.0	℃	ISO 75-2/A
Vicat Softening Temp
B50	200	℃	ISO 306

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature – hot air dryer	80	°C
Drying time – hot air dryer	2.0 to 12	hr
Recommended maximum moisture content	0.015	%
Processing (melt) temperature	270 to 290	°C
Mold temperature	80 to 100	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.