ALTECH® PA6 + ASA A 4010/312 MR10 IM UV

About
ALTECH® PA6 + ASA A 4010/312 MR10 IM UV is an Acrylonitrile Styrene Acrylate + PA (ASA+Nylon) product filled with 10% mineral. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive. Characteristics include: RoHS Compliant Heat Resistant Impact Modified Impact Resistant Moisture Resistant&&

Product Description
Supplier	ALBIS
Generic	ASA+PA
Material Status	Commercial: Active
Features	Weather resistance is good,Low warping,Good heat aging resistance,High impact resistance,Low or no water absorption,High scratch resistance
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.14	g/cm³	ISO 1183
Melt Volume Rate
260℃，5 kg	7.00	cm³/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1700	MPa	ISO 527-2
tensile strength	35.0	MPa	ISO 527-2
Tensile strain
fracture	50	%	ISO 527-2
Bending modulus	1600	MPa	ISO 178
bending strength	55.0	MPa	ISO 178

IMPACT	Nominal value	Unit
Charpy Notched Impact Strength
—	30	kJ/m²
-40℃	10	kJ/m²
Charpy Unnotch Impact strength
—	无断裂
-40℃	无断裂

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	60.0	℃	ISO 75-2/A
Vicat Softening Temp
B50	120	℃	ISO 306
Melting temperature
DSC	220	℃	ISO 11357

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature – hot air dryer	80	°C
Drying time – hot air dryer	4.0	hr
Recommended maximum moisture content	< 0.10	%
Processing (melt) temperature	250 to 280	°C
Mold temperature	40 to 80	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.