ALTECH® PA6 B 2015/106 GF15

About
ALTECH® PA6 B 2015/106 GF15 is a Polyamide 6 (Nylon 6) product filled with 15% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of ALTECH® PA6 B 2015/106 GF15 include automotive and electrical/electronic applications. Characteristics include: RoHS Compliant Heat Resistant High Gloss&&

Product Description
Supplier	ALBIS
Generic	PA6
Material Status	Commercial: Active
Features	Good surface appearance,Heat Stabilized
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.23	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	5700	MPa	ISO 527-2
tensile strength
fracture	108	MPa	ISO 527-2
Tensile strain
fracture	2.5	%	ISO 527-2
Bending modulus	5000	MPa	ISO 178
bending strength	170	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	5.0	kJ/m²	ISO 179-1eA
Charpy Unnotch Impact strength	34	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	198	℃	ISO 75-2/A

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	> 1.0E+12	ohms	IEC 60093
Volume resistivity	1.0E+15	ohms·cm	IEC 60093
Compared to the leakage tracing index	500	V	IEC 60112

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80	°C
Drying time	2.0 to 12	hr
Processing (melt) temperature	270 to 290	°C
Mold temperature	80 to 100	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.