ALTECH® PA6 ECO 2025/509 GF25

About
ALTECH® PA6 ECO 2025/509 GF25 is a Polyamide 6 (Nylon 6) product filled with 25% glass fiber. It is available in Asia Pacific, Europe, or North America. Typical application: Housings. Characteristics include: Flame Rated RoHS Compliant Good Mold Release Heat Resistant Heat Stabilizer&&

Product Description
SupplierALBIS
GenericPA6
Material StatusCommercial: Active
FeaturesHigh liquidity,Good stripping performance,Heat Stabilized
AvailabilitysNorth America,Asia Pacific,Europe
Process MethodsInjection Molding

Technical Data

Process Conditions
injectionNominal valueUnitTest method
Drying temperature – hot air dryer80°C
Drying time – hot air dryer2.0 to 12hr
Recommended maximum moisture content0.15%
Processing (melt) temperature270 to 290°C
Mold temperature80 to 100°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. m-Cresol,c = 10 g/l
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.