ALTECH® PA66 A 2030/588 GF30

About
ALTECH® PA66 A 2030/588 GF30 is a Polyamide 66 (Nylon 66) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Typical application: Automotive. Characteristics include: RoHS Compliant Chemical Resistant Good Mold Release Heat Resistant&&

Product Description
Supplier	ALBIS
Generic	PA66
Material Status	Commercial: Active
Features	Good liquidity,Good stripping performance,Grease resistance,Heat Stabilized
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.37	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	9300	MPa	ISO 527-2
tensile strength	160	MPa	ISO 527-2
Tensile strain
fracture	2.6	%	ISO 527-2
Bending modulus	8600	MPa	ISO 178
bending strength	240	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	6.0	kJ/m²	ISO 179-1eA
Charpy Unnotch Impact strength	50	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	255	℃	ISO 75-2/A
Vicat Softening Temp
B50	250	℃	ISO 306

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature – hot air dryer	80	°C
Drying time – hot air dryer	8.0 to 12	hr
Recommended maximum moisture content	0.15	%
Processing (melt) temperature	280 to 300	°C
Mold temperature	80 to 120	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.