ALTECH® PA66 A 2060/100 GF60

About
ALTECH® PA66 A 2060/100 GF60 is a Polyamide 66 (Nylon 66) product filled with 60% glass fiber. It is available in Asia Pacific, Europe, or North America. Characteristics include: RoHS Compliant Fast Molding Cycle Good Mold Release Heat Stabilizer High Flow&&

Product Description
Supplier	ALBIS
Generic	PA66
Material Status	Commercial: Active
Features	Good Rigidity,High liquidity,Low or no water absorption,Good stripping performance,Heat Stabilized
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.70	g/cm³	ISO 1183
Spiral flow length
2.00 mm	550	mm

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	19500	MPa	ISO 527-2
tensile strength
fracture	230	MPa	ISO 527-2
Tensile strain
fracture	2.0	%	ISO 527-2
Bending modulus	18000	MPa	ISO 178
bending strength	360	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	10	kJ/m²	ISO 179-1eA
Charpy Unnotch Impact strength	70	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	260	℃	ISO 75-2/A
Vicat Softening Temp
B50	250	℃	ISO 306

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80	°C
Drying time	2.0 to 12	hr
Recommended maximum moisture content	0.15	%
Processing (melt) temperature	280 to 300	°C
Mold temperature	80 to 120	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.