| About |
|---|
| ALTECH® PA66 FC 3030/520.01 GB30 UV is a Polyamide 66 (Nylon 66) product filled with 30% glass bead. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of ALTECH® PA66 FC 3030/520.01 GB30 UV include appliances, engineering/industrial parts and food contact applications. Characteristics include: RoHS Compliant Food Contact Acceptable Good Mold Release Heat Resistant UV Stabilized&& |
| Product Description | |
|---|---|
| Supplier | ALBIS |
| Generic | PA66 |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good heat aging resistance,Good stripping performance,Food contact compliance |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.36 | g/cm³ | ISO 1183 |
| Relative viscosity | 2.90 | ISO 307 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 4600 | MPa | ISO 527-2 |
| tensile strength | 85.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 5.0 | % | ISO 527-2 |
| Bending modulus | 4300 | MPa | ISO 178 |
| bending strength | 135 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| — | 3.0 | kJ/m² | |
| -40℃ | 2.0 | kJ/m² | |
| Charpy Unnotch Impact strength | |||
| — | 22 | kJ/m² | |
| -40℃ | 20 | kJ/m² |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 96.0 | ℃ | ISO 75-2/A |
| Vicat Softening Temp | |||
| B50 | 243 | ℃ | ISO 306 |
| Melting temperature | |||
| DSC | 262 | ℃ | ISO 11357 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature – hot air dryer | 80 | °C | |
| Drying time – hot air dryer | 2.0 to 12 | hr | |
| Recommended maximum moisture content | 0.15 | % | |
| Processing (melt) temperature | 280 to 300 | °C | |
| Mold temperature | 80 to 120 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. m-Cresol,c = 10 g/l |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |