ALTECH® PBT + ASA A 4212/507 MR/GF12

About
ALTECH® PBT + ASA A 4212/507 MR/GF12 is an Acrylonitrile Butadiene Styrene + PBT (ABS+PBT) product filled with 12% glassmineral. It is available in Asia Pacific, Europe, or North America. Typical application: Engineering/Industrial Parts. Characteristics include: RoHS Compliant Heat Resistant High Flow Impact Modified Warp Resistant&&

Product Description
SupplierALBIS
GenericPBT+ASA
Material StatusCommercial: Negative
FeaturesLow warping,High impact resistance,Heat Stabilized
AvailabilitysNorth America,Asia Pacific,Europe

Technical Data
PHYSICALNominal valueUnitTest method
Density1.29g/cm³ISO 1183
Melt Volume Rate
260℃,2.16 kg20.0cm³/10minISO 1133
Shrinkage rate ISO 294-4
TD:24 hrs0.60 to 0.90%ISO 294-4
MD:24 hrs0.70 to 1.0%ISO 294-4

MECHANICALNominal valueUnitTest method
Tensile modulus3100MPaISO 527-2
tensile strength50.0MPaISO 527-2
Tensile strain
fracture4.0%ISO 527-2
Bending modulus2900MPaISO 178
bending strength85.0MPaISO 178

IMPACTNominal valueUnitTest method
Charpy Notched Impact Strength ISO 179/1eA
4.0kJ/m²ISO 179/1eA
-40℃3.0kJ/m²ISO 179/1eA
Charpy Unnotch Impact strength ISO 179/1eU
30kJ/m²ISO 179/1eU
-40℃20kJ/m²ISO 179/1eU

THERMALNominal valueUnitTest method
Hot deformation temperature
1.8 MPa, unannealed95.0ISO 75-2/A
Vicat Softening Temp
B50123ISO 306

Process Conditions
injectionNominal valueUnitTest method
Drying temperature90 to 115°C
Drying time2.0 to 4.0hr
Processing (melt) temperature250 to 280°C
Mold temperature60 to 100°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.