ALTECH® PC B 2010/100 GF10

About
ALTECH® PC B 2010/100 GF10 is a Polycarbonate (PC) product filled with 10% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Construction Applications. Primary characteristic: rohs compliant.&&

Product Description
Supplier	ALBIS
Generic	Polycarbonate
Material Status	Commercial: Active
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.26	g/cm³	ISO 1183
Melt Volume Rate
300℃，1.2 kg	10.0	cm³/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	4000	MPa	ISO 527-2
tensile strength
fracture	75.0	MPa	ISO 527-2
Tensile strain
fracture	4.0	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	8.0	kJ/m²	ISO 179-1eA
Charpy Unnotch Impact strength	50	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	141	℃	ISO 75-2/A
Vicat Softening Temp	145	℃	ISO 306/B

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature – hot air dryer	100 to 120	°C
Drying time – hot air dryer	2.0 to 3.0	hr
Recommended maximum moisture content	0.020	%
Processing (melt) temperature	310 to 330	°C
Mold temperature	80 to 130	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.