| About |
|---|
| ALTECH® PP-B B 2020/550 GF20 is a Polypropylene Copolymer (PP Copolymer) product filled with 20% glass fiber. It is available in Asia Pacific, Europe, or North America. Applications of ALTECH® PP-B B 2020/550 GF20 include construction applications, handles, medical/healthcare, packaging and tools. Characteristics include: RoHS Compliant Chemically Coupled&& |
| Product Description | |
|---|---|
| Supplier | ALBIS |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Chemical coupling,Copolymer |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.00 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 8.0 | g/10min | ISO 1133 |
| Melt Volume Rate | |||
| 230℃，2.16 kg | 8.00 | cm³/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 4400 | MPa | ISO 527-2 |
| tensile strength | 65.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 4.0 | % | ISO 527-2 |
| Bending modulus | 3400 | MPa | ISO 178 |
| bending strength | 95.0 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| — | 15 | kJ/m² | ISO 179/1eA |
| -40℃ | 10 | kJ/m² | ISO 179/1eA |
| -20℃ | 10 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | ISO 179/1eU | ||
| — | 50 | kJ/m² | ISO 179/1eU |
| -40℃ | 50 | kJ/m² | ISO 179/1eU |
| -20℃ | 50 | kJ/m² | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 140 | ℃ | ISO 75-2/A |
| Vicat Softening Temp | |||
| B50 | 115 | ℃ | ISO 306 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | |||
| Desiccant desiccant | 80 to 120 | °C | |
| Hot air dryer | 80 to 120 | °C | |
| Drying time | |||
| Desiccant desiccant | 2.0 to 4.0 | hr | |
| Hot air dryer | 2.0 to 3.0 | hr | |
| Processing (melt) temperature | 200 to 270 | °C | |
| Mold temperature | 20 to 90 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |