ALTECH® PP-H A 2030/250 GF30 CP

About
ALTECH® PP-H A 2030/250 GF30 CP is a Polypropylene Homopolymer (PP Homopolymer) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Characteristics include: RoHS Compliant Chemically Coupled Good Mold Release Heat Resistant Homopolymer&&

Product Description
Supplier	ALBIS
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	High impact resistance,Good stripping performance,Chemical coupling,Heat Stabilized,Homopolymer
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.11	g/cm³	ISO 1183
Melt Flow Rate
230℃，5.0kg	6.0	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	6000	MPa	ISO 527-2
tensile strength
fracture	80.0	MPa	ISO 527-2
Tensile strain
fracture	4.0	%	ISO 527-2
bending strength	120	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	14	kJ/m²	ISO 179-1eA
Charpy Unnotch Impact strength	57	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	144	℃	ISO 75-2/A
Vicat Softening Temp
B50	134	℃	ISO 306

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80 to 120	°C
Drying time	2.0 to 3.0	hr
Processing (melt) temperature	200 to 270	°C
Mold temperature	20 to 90	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.