ALTECH® PP-H A 2030/556 LE GF30 CP

About
ALTECH® PP-H A 2030/556 LE GF30 CP is a Polypropylene Homopolymer (PP Homopolymer) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive. Characteristics include: RoHS Compliant Chemically Coupled Heat Resistant Homopolymer Low Emissions&&

Product Description
Supplier	ALBIS
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good heat aging resistance,Good liquidity,Low odor,Chemical coupling,Homopolymer
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.12	g/cm³	ISO 1183
Melt Flow Rate	6.0	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	7250	MPa	ISO 527-2
tensile strength
fracture	87.0	MPa	ISO 527-2
Tensile strain
fracture	3.3	%	ISO 527-2
Bending modulus	6000	MPa	ISO 178
bending strength	135	MPa	ISO 178

IMPACT	Nominal value	Unit
Charpy Notched Impact Strength
—	11	kJ/m²
-30℃	8.0	kJ/m²
Charpy Unnotch Impact strength
—	55	kJ/m²
-30℃	45	kJ/m²

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	150	℃	ISO 75-2/A
Vicat Softening Temp
B50	137	℃	ISO 306

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature – Dehumidifying desiccant	80 to 120	°C
Drying time – Dehumidifying desiccant	2.0 to 4.0	hr
Processing (melt) temperature	200 to 270	°C
Mold temperature	20 to 90	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.