| About |
|---|
| ALTUGLAS®BS 510 is a methacryliccopolymer of medium molecular weight with good solubility and fluidity, available in the form of solid beads. ALTUGLAS®BS 510 has common application in Acrylic Composites and in Solvent coating (Binder). Specific applications of ALTUGLAS®BS 510 are Porous Moulds Resins for ceramic and Low-profile Additive for polyester curable resins. Use of ALTUGLAS®BS 510 in compounding to make acrylic Master-batches is suggested.&& |
| Product Description | |
|---|---|
| Supplier | Trinseo |
| Material Status | Commercial: Active |
| Features | Good liquidity,Copolymer |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.70 | g/cm³ | |
| Melt Flow Rate | |||
| 230℃，3.80kg | 3.0 | g/10min | |
| acid value | < 1.00 | mg KOH/g | |
| Intrinsic viscosity | 0.49 to 0.51 | dl/g | |
| Particle size | 150 to 200 | µm | |
| viscosity | |||
| 30wt% MEK solvent | 0.9 | Pa·s | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | 110 | ℃ |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Residual monomer | < 0.35 | % | |
| volatility | < 1.5 | % |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |