Altuglas® BS 520

About
ALTUGLAS®BS 520 is a methacryliccopolymer of relatively high molecular weight available in the form of solid beads. ALTUGLAS®BS 520 has possible application in Acrylic Composites (especially acrylic stone) and in Solvent coating (Binder) Specific applications of ALTUGLAS®BS 520 are Porous Moulds Resins for ceramic and Low-profile Additive for polyester curable resins. Use of ALTUGLAS®BS 520 in compounding to make acrylic Master-batches is possible.&&

About

ALTUGLAS®BS 520 is a methacryliccopolymer of relatively high molecular weight available in the form of solid beads. ALTUGLAS®BS 520 has possible application in Acrylic Composites (especially acrylic stone) and in Solvent coating (Binder) Specific applications of ALTUGLAS®BS 520 are Porous Moulds Resins for ceramic and Low-profile Additive for polyester curable resins. Use of ALTUGLAS®BS 520 in compounding to make acrylic Master-batches is possible.&&

Product Description
Supplier	Trinseo
Material Status	Commercial: Active
Features	High molecular weight,Copolymer
Availabilitys	Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Apparent density	0.70	g/cm³
Melt Flow Rate
230℃，3.80kg	1.5	g/10min
acid value	< 1.00	mg KOH/g
Intrinsic viscosity	0.59 to 0.62	dl/g
Particle size	150 to 200	µm
viscosity
30wt% MEK solvent	1.40	Pa·s

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	107	℃

Supplementary information	Nominal value	Unit	Test method
Residual monomer	< 0.35	%
volatility	< 1.5	%

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.