| About |
|---|
| ALTUGLAS®BS 550 is a methacryliccopolymer of medium molecular weight with high solubility and fluidity, available in the form of solid beads. ALTUGLAS®BS 550, because of its good compatibility with resins and solvents, has a broad range of application as Inclusion, Acrylic Composites, Acrylic Floor-Coating and Binder in solvent coatings. Use of ALTUGLAS®BS 550 in compounding to make acrylic Master-batches is suggested.&& |
| Product Description | |
|---|---|
| Supplier | Trinseo |
| Material Status | Commercial: Active |
| Features | Copolymer |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.70 | g/cm³ | |
| Melt Flow Rate | |||
| 230℃，3.80kg | 15 | g/10min | |
| acid value | < 1.00 | mg KOH/g | |
| Intrinsic viscosity | 0.45 to 0.48 | dl/g | |
| Particle size | 150 to 200 | µm | |
| viscosity | |||
| 30wt% MEK solvent | 0.3 | Pa·s | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | 88.0 | ℃ |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Residual monomer | < 0.50 | % | |
| volatility | < 1.5 | % |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |