About |
---|
ALTUGLAS®BS 572 is a pure methylmethacrylate polymer with very high molecular weight in the form of spherical particles (beads) with large size. Because of its large size and composition, ALTUGLAS®BS 572 is able to provide really interesting rough surface effects when compounded in other thermoplastic polymers (film, extrusion…).ALTUGLAS®BS 572 can give special surface effects as additive in Waterborne and UV coatings.Due to its high molecular weight, ALTUGLAS®BS 572 can be used as special Binder (glues, solvent hard topcoat…).&& |
Product Description | |
---|---|
Supplier | Trinseo |
Material Status | Commercial: Active |
Features | High purity,Ultra high molecular weight,Low smoothness |
Availabilitys | Europe,Asia Pacific |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Apparent density | 0.70 | g/cm³ | |
acid value | mg KOH/g | ||
Intrinsic viscosity | 1.6 to 1.8 | dl/g | |
Particle size | 300 | µm |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Glass transition temperature | 118 | ℃ |
Supplementary information | Nominal value | Unit | Test method |
---|---|---|---|
Residual monomer | % | ||
volatility | % |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |