| About |
|---|
| Amilan® CM3001R是一种聚酰胺66（尼龙66）产品,含有的填充物为40% 矿物填料。 它,在北美洲、欧洲或亚太地区有供货。 特性包括: 阻燃/额定火焰 抗翘曲&& |
| Product Description | |
|---|---|
| Supplier | Toray |
| Generic | PA66 |
| Material Status | Commercial: Active |
| Features | Low warping |
| Availabilitys | Asia Pacific,North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.51 | g/cm³ | ISO 1183 |
| Shrinkage rate | Internal Method | ||
| TD：3.0 mm | 1.0 to 1.4 | % | Internal Method |
| MD：3.0 mm | 0.70 to 1.0 | % | Internal Method |
| Water absorption rate | ISO 62 | ||
| 23℃，24hr | 0.60 | % | ISO 62 |
| Saturation, 23 ℃ | 5.1 | % | ISO 62 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 5.5 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 243 | ℃ | ISO 75-2/B |
| 1.8 MPa, unannealed | 185 | ℃ | ISO 75-2/A |
| Melting temperature | 265 | ℃ | DSC |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | ISO 2039-2 | ||
| M-level | 83 | ISO 2039-2 | |
| R-level | 120 | ISO 2039-2 | |
| tensile strength | ISO 527-2 | ||
| -40℃ | 120 | MPa | ISO 527-2 |
| 23℃ | 95.0 | MPa | ISO 527-2 |
| 80℃ | 40.0 | MPa | ISO 527-2 |
| Tensile strain | ISO 527-2 | ||
| Fracture, -40 ℃ | 3.0 | % | ISO 527-2 |
| Fracture, 23 ℃ | 3.5 | % | ISO 527-2 |
| Fracture, 80 ℃ | 5.0 | % | ISO 527-2 |
| Bending modulus | ISO 178 | ||
| -40℃ | 6200 | MPa | ISO 178 |
| 23℃ | 5800 | MPa | ISO 178 |
| 80℃ | 2000 | MPa | ISO 178 |
| bending strength | ISO 178 | ||
| -40℃ | 185 | MPa | ISO 178 |
| 23℃ | 155 | MPa | ISO 178 |
| 80℃ | 65.0 | MPa | ISO 178 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |