| About |
|---|
| Amilan® U141 is a Polyamide 6 (Nylon 6) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: impact resistant.&& |
| Product Description | |
|---|---|
| Supplier | Toray |
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | High impact resistance |
| Availabilitys | Asia Pacific,Europe,North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.06 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| TD：3.0 mm | 0.80 to 1.3 | % | Internal Method |
| Water absorption rate | ISO 62 | ||
| 23℃，24hr | 0.70 | % | ISO 62 |
| Saturation, 23 ℃ | 6.0 | % | ISO 62 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -40℃ | 34 | kJ/m² | ISO 179 |
| 23℃ | 110 | kJ/m² | ISO 179 |
| Charpy Unnotch Impact strength | |||
| 23℃ | 无断裂 | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 155 | ℃ | ISO 75-2/B |
| 1.8 MPa, unannealed | 55.0 | ℃ | ISO 75-2/A |
| Melting temperature | 225 | ℃ | DSC |
| Linear coefficient of thermal expansion | |||
| MD | 7.0E-5 to 8.0E-5 | 1/℃ | ISO 11359-2 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 112 | ISO 2039-2 | |
| tensile strength | ISO 527-2 | ||
| -40℃ | 80.0 | MPa | ISO 527-2 |
| 23℃ | 50.0 | MPa | ISO 527-2 |
| Tensile strain | ISO 527-2 | ||
| Fracture, -40 ℃ | 16 | % | ISO 527-2 |
| Fracture, 23 ℃ | 50 | % | ISO 527-2 |
| Bending modulus | ISO 178 | ||
| -40℃ | 2300 | MPa | ISO 178 |
| 23℃ | 1500 | MPa | ISO 178 |
| bending strength | ISO 178 | ||
| -40℃ | 65.0 | MPa | ISO 178 |
| 23℃ | 55.0 | MPa | ISO 178 |
| Taber abraser | |||
| 1000 cycles | 7.00 to 8.00 | mg | ISO 9352 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 80x80x3mm |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |