Amodel® A-1130 FW

About
Amodel® A-1130 FW is a 30% glass-fiber reinforced polyphthalamide (PPA) grade containing a solid lubricant. This resin was designed for moderate-pressure, low-velocity friction and wear applications. Black: A-1130 FW BK 324&&

Product Description
Supplier	Solvay
Generic	PPA
Material Status	Commercial: Active
Features	Good Rigidity,Good flexibility,Good Dimensional Stability,Low coefficient of friction,Good wear resistance,Solvent resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.55	g/cm³	ISO 1183/A

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	11200	MPa	ISO 527-2
tensile strength
fracture	187	MPa	ISO 527-2
Tensile strain
fracture	2.0	%	ISO 527-2
Bending modulus	9580	MPa	ISO 178
bending strength	252	MPa	ISO 178

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	285	℃	ISO 75-2/A
Melting temperature	313	℃	ISO 11357-3

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	110	°C
Drying time	4.0	hr
Recommended maximum moisture content	0.045	%
Barrel rear temperature	304 to 318	°C
Barrel front temperature	316 to 329	°C
Processing (melt) temperature	329 to 343	°C
Mold temperature	135	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.