Amodel® A-1145 DW

About
Amodel® A-1145 DW is a 45% glass-fiber-reinforced resin designed for high strength and stiffness and improved hydrolytic stability. This material has low moisture absorption and a low coefficient of thermal expansion, which means excellent dimensional stability. Creep resistance is also exceptional. This grade has been approved for use with potable water in the United States, France, Germany, and the United Kingdom. Natural: A-1145 NT DW Black: A-1145 BK 937 DW&&

About

Amodel® A-1145 DW is a 45% glass-fiber-reinforced resin designed for high strength and stiffness and improved hydrolytic stability. This material has low moisture absorption and a low coefficient of thermal expansion, which means excellent dimensional stability. Creep resistance is also exceptional. This grade has been approved for use with potable water in the United States, France, Germany, and the United Kingdom. Natural: A-1145 NT DW Black: A-1145 BK 937 DW&&

Product Description
Supplier	Solvay
Generic	PPA
Material Status	Commercial: Active
Features	Good Rigidity,Good flexibility,Good Dimensional Stability,Solvent resistance,Low moisture absorption,Chlorine-resistant
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.61	g/cm³	ISO 1183/A

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	15100	MPa	ISO 527-2
tensile strength
yield	232	MPa	ISO 527-2
Tensile strain
Fracture, 23 ℃	1.8	%	ISO 527-2
Bending modulus
23℃	14000	MPa	ISO 178
bending strength	330	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	9.9	kJ/m²	ISO 179
Impact strength of cantilever beam notch	7.8	kJ/m²	ISO 180

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	302	℃	ISO 75-2/Af

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	120	°C
Drying time	4.0	hr
Recommended maximum moisture content	0.030 to 0.060	%
Barrel rear temperature	316 to 329	°C
Barrel middle temperature	316 to 329	°C
Barrel front temperature	324 to 335	°C
Processing (melt) temperature	321 to 343	°C
Mold temperature	150	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.