| About |
|---|
| AMPLIFY™ IO 3802 乙烯丙烯酸离子键聚合物用于吹塑和流延薄膜的共挤出加工，用于软质包装应用领域。在与尼龙和其他薄膜共挤出时，该产品可提供优异的密封性能。 用于食品包装和特种包装 吹塑和流延薄膜共挤出加工中的优异的密封剂 符合以下法规： 美国食品和药物管理局法规 21 CFR 177.1310 (c) EU, No 10/2011 请查询法规以获取完备的细节资料。&& |
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | 离聚物 |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.954 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.8 | g/10min | ASTM D1238 |
| Ionic type | 钠 (Na | ||
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 51 | µm | |
| tensile strength | ASTM D882 | ||
| MD, yield, 51 µ m | 23.1 | MPa | ASTM D882 |
| TD, yield, 51 µ m | 19.5 | MPa | ASTM D882 |
| MD, fracture, 51 µ m | 38.2 | MPa | ASTM D882 |
| TD, fracture, 51 µ m | 39.4 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture, 51 µ m | 240 | % | ASTM D882 |
| TD, fracture, 51 µ m | 330 | % | ASTM D882 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 67.2 | ℃ | ASTM D1525 |
| Melting temperature | |||
| DSC | 88.9 | ℃ | Internal Method |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |