Andur 2-92 AP/Curene® 442

About
Andur 2-92AP is a polyether (PTMG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 92 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4′-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or by the use of plasticizers.&&

About

Andur 2-92AP is a polyether (PTMG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 92 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4′-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or by the use of plasticizers.&&

Product Description
Generic	PUR-脂肪族+TDI
Material Status	Commercial: Active
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.08	g/cm³	ASTM D1505

elastic body	Nominal value	Unit	Test method
tensile strength			ASTM D412
yield	49.2	MPa	ASTM D412
100% strain	10.0	MPa	ASTM D412
300% strain	20.8	MPa	ASTM D412
Tensile strain
fracture	410	%	ASTM D412
Compression deformation	27	%	ASTM D395B
Basho’s elasticity	46	%	ASTM D2632

THERMAL	Nominal value	Unit
storage stability	5.0 to 6.0	min
stripping time	30 to 40	min
Post curing time
96℃	16	hr

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	92		ASTM D2240
compressive strength			ASTM D695
5% strain	1.49	MPa	ASTM D695
10% strain	3.55	MPa	ASTM D695
15% strain	5.65	MPa	ASTM D695
25% strain	8.48	MPa	ASTM D695

Process Conditions
injection	Nominal value	Unit	Test method
Mold temperature	104 to 121	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.