Andur 2-95AP/Curene® 280

About
All properties based on Andur® 2-95AP cured with Curene® 280&&

Product Description
Generic	PUR-脂肪族+TDI
Material Status	Commercial: Active
Availabilitys	North America
Process Methods	casting

Technical Data
elastic body	Nominal value	Unit	Test method
tensile strength			ASTM D412
100% strain	6.92	MPa
300% strain	9.83	MPa
tear strength
—	77.1	kN/m	ASTM D624
cracking	39	kN/m	ASTM D470
Compression deformation	36	%	ASTM D395

THERMAL	Nominal value	Unit	Test method
Post curing time
23℃	72	hr

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	90		ASTM D2240
tensile strength	18.5	MPa	ASTM D638
Tensile strain
fracture	520	%	ASTM D638

Process Conditions
injection	Nominal value	Unit	Test method
Mold temperature	107	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.