| About |
|---|
| Andur® 700 APX is a Polyurethane (Polyester/Polyether mix, TDI) (PUR-Est/eth,TDI) product. It is available in North America.&& |
| Product Description | |
|---|---|
| Generic | PUR-酯/醚+TDI |
| Material Status | Commercial: Active |
| Availabilitys | North America |
| Process Methods | casting |
| Technical Data | |||
|---|---|---|---|
| elastic body | Nominal value | Unit | Test method |
| tensile strength | ASTM D412 | ||
| fracture | 17.0 | MPa | ASTM D638 |
| 100% strain | 2.28 | MPa | ASTM D412 |
| 300% strain | 3.24 | MPa | ASTM D412 |
| Compression deformation | 42 | % | ASTM D395B |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| storage stability | 10 to 12 | min |
| Thermosetting mixed viscosity | Nominal value | Unit | Test method |
|---|---|---|---|
| 70℃ | 1000 | cP | ASTM D2393 |
| stripping time | 45 | min | |
| Post curing time | |||
| 93℃ | 16 | hr |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 70 | ASTM D2240 | |
| Tensile strain | |||
| fracture | 890 | % | ASTM D638 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Mold temperature | 104 to 113 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |