Andur 8 APLM/Curene® 442

About
Andur 8 APLM is a polyester based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 79 to 82 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4′-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various poyols and their combination with Curene 442 and other diamines, or through the use of plasticizers.&&

About

Andur 8 APLM is a polyester based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 79 to 82 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4′-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various poyols and their combination with Curene 442 and other diamines, or through the use of plasticizers.&&

Product Description
Generic	PUR-酯+TDI
Material Status	Commercial: Active
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.21	g/cm³	ASTM D1505
Shrinkage rate
MD	1.5	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	80		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength			ASTM D412
yield	50.3	MPa	ASTM D412
100% strain	3.96	MPa	ASTM D412
300% strain	6.00	MPa	ASTM D412
Tensile strain
fracture	640	%	ASTM D412
Compression deformation	26	%	ASTM D395B
Basho’s elasticity	39	%	ASTM D2632

THERMAL	Nominal value	Unit
storage stability	9.0 to 13	min
stripping time
100℃	30	min
Post curing time
100℃	16	hr

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.