Andur 8003 AS/Ethacure® 100LC

About
Andur 8003AS is a 80 Shore A, low cost, high performance urethane. Andur 8003AS offers high rebound and excellent dynamic properties in a moderate to low cost system. In addition, when properly cast, Andur 8003AS gives a water white finished product. Andur 8003AS performs best when cast with Ethacure 100LC through meter mix and dispense equipment however, product modifications are available which may extend working time to offer hand batch opportunities. This system is primarily recommended for applications that require superior dynamic performance, or enhanced product clarity. In addition, low processing temperatures and quick cycle times offer processing advantages.&&

About

Andur 8003AS is a 80 Shore A, low cost, high performance urethane. Andur 8003AS offers high rebound and excellent dynamic properties in a moderate to low cost system. In addition, when properly cast, Andur 8003AS gives a water white finished product. Andur 8003AS performs best when cast with Ethacure 100LC through meter mix and dispense equipment however, product modifications are available which may extend working time to offer hand batch opportunities. This system is primarily recommended for applications that require superior dynamic performance, or enhanced product clarity. In addition, low processing temperatures and quick cycle times offer processing advantages.&&

Product Description
Generic	PUR+TDI
Material Status	Commercial: Active
Features	Excellent Processability,Good Clarity,Quick molding cycle
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.07	g/cm³	ASTM D1505

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	81		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength			ASTM D412
yield	23.4	MPa	ASTM D412
100% strain	3.45	MPa	ASTM D412
300% strain	6.21	MPa	ASTM D412
Tensile strain
fracture	850	%	ASTM D412
Basho’s elasticity	60	%	ASTM D2632

THERMAL	Nominal value	Unit
storage stability	1.8	min
stripping time
100℃	15	min
Post curing time
100℃	16	hr

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.