Anjacom® 036/80

About
Anjacom® 036/80 is a Polyamide 6 + ASA (Nylon 6+ASA) material. It is available in Europe. Primary attribute of Anjacom® 036/80: Flame Rated.&&

Product Description
Generic	PA 6+ASA
Material Status	Commercial: Active
Features	HB
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.06	g/cm³	ISO 1183
Melt Flow Rate
220℃，5.0kg	2.0	g/10min	ISO 1133
Melt Volume Rate
250℃，5 kg	2.00	cm³/10min	ISO 1133
Shrinkage rate			ISO 294-4
TD	0.70	%	ISO 294-4
MD	0.70	%	ISO 294-4
Water absorption rate
Equilibrium, 23 ℃, 50% RH	1.5	%	ISO 62

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2200	MPa	ISO 527-1-2
tensile strength
yield	40.0	MPa	ISO 527-2/50
Tensile strain
fracture	3.5	%	ISO 527-2/50

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	15	kJ/m²	ISO 179/1eA
Charpy Unnotch Impact strength
23℃	无断裂		ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp
B50	100	℃	ISO 306

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.60 mm	HB		UL 94

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80	°C
Drying time	2.0 to 5.0	hr
Recommended maximum moisture content	0.020	%
Processing (melt) temperature	240 to 270	°C
Mold temperature	60 to 90	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.